Expedition 4WD V8-281 4.6L SOHC (1998)
81.
On 4X4 models, remove one (1) screw shown in Figure 44, from both wheel opening moldings.
82.
Remove both front fender splash shields. See Figure 45.
83.
Raise vehicle.
84.
Disconnect exhaust Y-pipe from exhaust manifolds.
85.
Slightly lower vehicle. Exhaust manifold retainers will be accessed through the wheel well opening.
86.
Remove left side exhaust manifold and gasket. Retain gasket for reuse. Replace gasket if damaged.
87.
Loosen engine oil indicator tube; then turn tube away from cylinder head. Removal of indicator tube is not necessary.
88.
Remove right side exhaust manifold and gasket. Retain gasket for reuse. Replace gasket if damaged.
89.
Remove retainer securing transmission indicator tube to right cylinder head if equipped.
NOTE:
Cylinder head bolts that are under the camshaft holding tools cannot be completely removed from the head due to clearance with the holding tool.
