Expedition 4WD V8-281 4.6L SOHC (1998)
18. Disconnect the oil pressure sending unit electrical connector.
19. Disconnect the Electronic Variable Orifice (EVO) electrical connector.
20. Lower the vehicle.
21. Remove the fuel charging wiring.
INSTALLATION
WARNING:
-
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
-
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING.
1. Position the fuel charging wiring on the engine.
2. Raise and support the vehicle.
3. Connect the oil pressure sending unit electrical connector.
