Expedition 4WD V8-281 4.6L SOHC (1998)
Camshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Always disconnect the battery ground cable prior to work on the electronic engine controls or damage to the electronic component
may occur.
4.6L shown, 5.4L similar
2. Remove the Camshaft Position sensor (CMP sensor).
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the camshaft position sensor.
INSTALLATION
1. Follow the removal procedure in reverse order.
