Expedition 4WD V8-281 4.6L SOHC (1998)
5. Remove the MAF sensor plate and Mass Air Flow sensor (MAF sensor) from the outlet side of the engine engine air cleaner.
6. Disconnect the MAF sensor electrical connector from the extension harness.
7. Separate the MAF sensor plate from the mass air flow sensor.
-
Remove the nuts from the MAF sensor plate.
INSTALLATION
CAUTION: The grommet used to seal the engine air cleaner housing at the extension harness must be fully seated. Failure to do so will result in
unmetered air entering the engine.
NOTE: Use the alignment notch to properly align the inlet side and the outlet side of the engine air cleaner.
1. Follow the removal procedure in reverse order.
