Expedition 4WD V8-281 4.6L SOHC (1998)
Power Steering Line/Hose: Service and Repair
Low Pressure Hose
REMOVAL
1. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR
TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION
SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN SHIFTING OF THE VEHICLE
DURING THESE OPERATIONS.
2. Disconnect the power steering low pressure hose. Drain the power steering system.
3. Lower the vehicle.
4. Disconnect and remove the power steering low pressure hose.
INSTALLATION
1. Follow the removal procedure in reverse order
2. Fill and bleed the power steering system and check for leaks.
