Expedition 4WD V8-281 4.6L SOHC (1998)
Suspension Spring ( Coil / Leaf ): Service and Repair
Installation
NOTE: Do not tighten any nuts or bolts until the rear suspension is raised so that the rear suspension lower arms are parallel to the ground. Once in
position, tighten all the nuts and bolts to specification.
1. Install the rear coil spring.
2. Position the rear suspension upper arm assemblies to the axle and install the bolts.
3. Position the rear suspension lower arm assemblies to the axle and install the bolts.
4. Position the trackbar assembly to the axle and install the bolts.