Expedition 4WD V8-281 4.6L SOHC (1998)
2. Install the wheel hub.
(1) Position the wheel hub on the front wheel driveshaft and joint and into the front wheel knuckle.
(2) Install the bolts.
3. Install the front brake anti-lock sensor.
(1) Install the front brake anti-lock sensor into the wheel hub.
(2) Install the bolt.
4. Install the front disc brake rotor shield and front axle hub nut.
(1) Position the front disc brake rotor shield.
(2) Install the bolts.
(3) Install the front axle hub nut.
(4) Install the retainer.
(5) Install cotter pin.
