Expedition 4WD V8-281 4.6L SOHC (1998)
Wheel Bearing: Service and Repair
Front
REMOVAL
NOTE: The wheel bearing and hub are replaced as an assembly.
1. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
2. Remove the wheel and tire assembly.
3. Remove the front disc brake rotor.
4. Remove the front wheel hub nut.
(1) Remove the cotter pin.
(2) Remove the retainer.
(3) Remove the nut.
5. Remove the front disc brake rotor shield.
(1) Remove the bolts.
(2) Remove the front disc brake rotor shield.
6. Remove the front brake anti-lock sensor.
(1) Remove the bolt.