Expedition 4WD V8-281 4.6L SOHC (1998)
10. Position the (A) pressure plate, (B) clutch pack and the (C) piston return spring and retainer.
11. Use (A) Direct Clutch Spring Compressor and an arbor press to compress the piston return spring and install the (B) retaining ring.
12. Slowly release the press pressure and remove the forward clutch.
13. NOTE: Before assembly, soak new clutch discs in transmission fluid for 15 minutes.
Install the clutch pack assembly.
1
Install the pressure ring.
2
Install the clutch pack.
3
Install the pressure plate.
14. Install the clutch pack retaining ring.