Expedition 4WD V8-281 4.6L SOHC (1998)
17. Remove the rear suspension arm retainer bolt, and position the rear suspension arm and bushing out of the way.
-
Repeat for the other side.
18. Remove the lower shock absorber retainer bolt.
-
Repeat for the other side.
19. Remove the rear axle housing vent hose.
20. CAUTION: Watch for obstructions.
Lower the rear axle on the jack until it is clear of the vehicle.
INSTALLATION
1. WARNING: USE EXTRA STRAPS TO SECURE THE REAR AXLE TO THE JACK.
Raise the rear axle into place using a suitable hydraulic jack.
