Expedition 4WD V8-281 4.6L SOHC (1998)
16. Remove the rear suspension arm and bushing retainer bolt, and position the rear suspension arm and bushing out of the way.
-
Repeat for the other side.
17. Remove the lower shock absorber retainer bolt.
-
Repeat for the other side.
18. Remove the rear axle housing vent hose.
19. CAUTION: This step requires an assistant to keep the axle clear of obstructions while the vehicle is being raised.
Raise the vehicle clear of the rear axle.
20. Remove both rear springs.
INSTALLATION
