Expedition 4WD V8-281 4.6L SOHC (1998)
NOTE: The bearing is installed correctly when the flange of the tool bottoms out on the tube flange.
2. Install the outer bearing.
-
Position the axle tube in the vise.
-
NOTE: Use the appropriate side of the Needle Bearing Replacer to install the outer bearing.
Use the Driver Handle and the Needle Bearing Replacer to install the outer bearing.
NOTE: Make sure the axle shaft seal flange is flush with the axle tube.
3. Use the Driver Handle and the Axle Shaft Seal Replacer to install the axle shaft seal.
