Expedition 4WD V8-281 4.6L SOHC (1998)
13. Rotate the differential several times to make sure the differential bearings are properly seated.
14. Use the Dial Indicator with Bracketry to recheck the backlash.
-
If backlash is within specification, go to Step 15. If not, repeat Step 9.
-
The specification shown is the full allowable range. For the preferred range, refer to Specifications.
15. Remove the bearing caps and bolts.
-
To establish differential bearing preload, increase both left and right shim sizes by the specification shown in the illustration.
-
Use the Shim Driver to ensure the differential bearing shims are fully seated and the assembly turns freely.
