Expedition 4WD V8-281 4.6L SOHC (1998)
11. CAUTION: When separating the clutch plates and clutch discs, note the sequence in which they are disassembled. They must be reassembled in
the same sequence.
CAUTION: Do not use acids or solvents when cleaning the differential clutch pack. Wipe components with a clean, lint-free cloth only.
Separate the differential clutch discs and clutch plates for cleaning and inspection.
-
Refer to the disassembled view of the limited slip differential case.
ASSEMBLY
1. Prelubricate each steel clutch plate and soak all friction plates in Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118-A for at least 15 minutes.
2. NOTE: Do not mix the differential clutch packs or shims from one side with the other.
NOTE: The Belleville spring is a dished plate.
Assemble the differential clutch packs (without the shims and Belleville springs) on the respective differential side gears.