Expedition 4WD V8-281 4.6L SOHC (1998)
Use digital Transmission Range (TR) Sensor Alignment Tool, to align the digital TR sensor slots.
9. Tighten the bolts.
10. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual lever shaft outer nut.
11. With the manual lever in overdrive connect the shift lever control cable.
12. Install the digital TR sensor electrical connector.
13. Lower the vehicle.
14. Connect the battery ground cable.
15. If equipped with air suspension, reactivate the system by turning on the air suspension switch.
