Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Alarm Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the PATS module.
1. Disconnect the electrical connector.
2. Remove the two screws.
3. Remove the PATS module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
