ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Module|Flow of Diagnosis|Page 10872 > < General Module|Flow of Diagnosis|Page 10870
Page 2
background image

5. Remove the two (A) instrument panel fuse junction panel bolts and remove the two (B) interior fuse junction panel nuts.

6. Disconnect the three (A) GEM electrical connectors from the (B) GEM.

7. Remove the three GEM screws and the GEM.

INSTALLATION 

1. To install, reverse the removal procedure. Check for proper operation.

2. Install the lower instrument panel steering column cover.

^

Position the lower instrument panel steering column cover.

^

Install the six screws.

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

General Module|Flow of Diagnosis|Page 10872 > < General Module|Flow of Diagnosis|Page 10870