Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
9. Tighten the four peanut fittings.
10. Install the tube brackets.
1. Position the bracket.
2. Install the nut.
^
Snap the tube into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the tube.
11. Install the muffler heat shield.
1. Position the shield.
2. Install the nuts
12. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
13. Install the grommet tube seal and retainer.