Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
8. Use (A) Front Cover Seal Remover to remove the (B) front cover seal.
INSTALLATION
1. Lubricate the (A) engine front cover and (B) front oil seal inner lip.
^
Use engine oil meeting Ford specification WSE-M2C908-A1.
2. Use the (A) Crankshaft Seal Replacer/Aligner to install the (B) front oil seal into the (C) engine front cover.
3. Apply silicone to the woodruff key slot on the crankshaft pulley.
^
Use Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
NOTE: The crankshaft pulley must be installed within four minutes after applying silicone.
