Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Blower Motor: Service and Repair
Auxiliary Blower Motor
REMOVAL
1. Remove the quarter trim panel access cover.
2. Remove the blower motor.
1. Disconnect the electrical connector.
2. Remove the three motor cover bolts.
3. Remove the blower motor cover.
4. Remove the blower motor bolts.
5. Remove the blower motor.
3. Remove the wheel from the blower motor.
1. Remove the push clip.
2. Remove the wheel.
INSTALLATION
1. To install, reverse the removal procedure.