Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
6. Tighten the two peanut fittings.
7. Install the tube brackets.
1. Position the bracket.
2. Install the nut.
^
Snap the tube into the bracket.
CAUTION: Insure that clearance exists between the frame and the tubes.
NOTE: The bracket must be positioned equally between the white location marks on the tube.
8. Connect heater water outlet tube to engine heater outlet hose.
9. Install the front fender splash shield.
10. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.