Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
5. Turn counterclockwise until the back of the headlamp switch knob is in the off position.
6. Turn the headlamp switch knob clockwise fully.
7. Remove the headlamp switch.
1. Pull headlamp switch from instrument panel.
2. Disconnect the electrical connectors.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive system may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16km (10 mi) or more to relearn the strategy.
