Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
^
Position left side timing chain over camshaft sprocket, aligning timing mark on chain with dot on camshaft sprocket. If necessary, loosen
camshaft holding tool and adjust camshaft sprocket to obtain timing mark alignment. Tighten camshaft holding tool after timing marks are
aligned.
^
Position right side crankshaft sprocket in right side timing chain. Make sure crankshaft sprocket hub is facing inward. Align mark on timing
chain with corresponding dot on crankshaft sprocket.
^
Slide right side sprocket and chain on crankshaft.
^
Position right side timing chain over camshaft sprocket, aligning timing mark on chain with dot on camshaft sprocket. If necessary, loosen
camshaft holding tool and adjust camshaft sprocket to obtain timing mark alignment. Tighten camshaft holding tool after timing marks are
aligned.
^
Make sure marks on timing chain are lined up with corresponding dots on crankshaft and camshaft sprockets. See Figure 60.
^
Make sure right side crankshaft sprocket is in front of left side crankshaft sprocket with hubs facing each other. See Figure 61.
36.
Install right and left timing chain tensioner guides.
