Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
^
Intake manifold.
^
Both cam covers.
Installation
1.
On all cylinder heads, install one (1) pipe plug into the rear of each cylinder head in locations shown in Figure 47.
2.
On 4.6L Romeo engines, install one (1) pipe plug into the front of each cylinder head in locations shown in Figure 48.
3.
Install CHT sensor to left cylinder head. Tighten sensor to 24-28 Nm (17-20 lb-ft).
4.
Install power steering bracket to left cylinder head.
5.
Install all spark plugs (both sides). Tighten plugs to 9-20 Nm (81-178 lb-in).
6.
Install right cylinder head gasket.
7.
Install right cylinder head.
