Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Ignition Coil: Service and Repair
Ignition Coil Bracket
REMOVAL
1. Remove the ignition coils.
2. Remove the RH ignition coil bracket.
1
Remove the RH ignition coil bracket bolts.
2
Remove the RH ignition coil bracket.
3. Remove the power steering hose bracket.
1
Remove the nuts.
2
Remove the power steering hose bracket.
4. Remove the LH ignition coil bracket.
1
Disconnect the Camshaft Position (CMP) sensor electrical connector.
2
Remove the LH ignition coil bracket bolt.
3
Remove the LH ignition coil bracket.
INSTALLATION
