Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the driver seat in its most rearward position and the passenger seat in its most forward position.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use Safety Belt Bolt Bit to remove the bolt.
3
Remove the buckle.
INSTALLATION
To install, reverse the removal procedure.
-
Check the restraint system for proper operation.
Front Seat
REMOVAL
NOTE: This procedure is for the LH side; RH side is similar.
1. Remove the safety belt guide bolt.
1
Lift the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
