Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
10. Remove the safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the retractor.
11. To install, reverse the removal procedure.
Driver Side
REMOVAL
NOTE: This procedure is for the LH side; RH side is similar.
1. Remove the safety belt guide bolt.
1
Lift the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
2. Remove the quarter trim panel.
3. Use T55 "Torx" Bit to remove the bolt.
