Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
4. Install the front shock absorber lower bolt and nut to the front suspension lower arm.
5. Load the torsion bar.
(1) Install the torsion bar adjuster.
(2) Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3) Tighten Torsion Bar Tool to load the torsion bar.
(4) Install the torsion bar adjuster nut.
(5) Install the torsion bar adjuster bolt.
(6) Remove Torsion Bar Tool.
^
Turn the torsion bar adjuster until the reference marks align.
^
Repeat for the other side.
6. Install the wheel hub.
7. Adjust the ride height.
