ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Recall - Rear Track Arm/Control Arm Bracket|Page 9075 > < Recall - Rear Track Arm/Control Arm Bracket|Page 9073

Expedition 4WD V8-4.6L SOHC VIN 6 (1997)

Page 19
background image

^

Using 12 mm drill bit, drill holes in rear flange of track bar bracket. See Figure 9. Make sure to drill straight through the track bar bracket. if
holes are drilled on an angle, the inside plate will not line up.

Recall - Rear Track Arm/Control Arm Bracket|Page 9075 > < Recall - Rear Track Arm/Control Arm Bracket|Page 9073