Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Suspension Mode Switch: Description and Operation
The air suspension switch is located behind the RH kick panel on a mounting bracket. The switch interrupts power to the control module.
The air suspension switch supplies a signal to the control module. Without the control module receiving this signal the load leveling system is
inoperative and will not react when rear of the vehicle is raised or lowered.
If the air suspension is disabled by turning off air suspension switch, a "CHECK SUSP" will appear in the RH corner of the cluster with the ignition in
the run position.
