Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford
specification WSK-M2G315-A5 and ESE-M4G204-A2 prior to installation.
8. Install the anti-lock speed sensor ring by aligning the tab on the anti-lock speed sensor ring with the slot on the differential case.
9. Press the new (A) anti-lock speed sensor ring and the (B) ring gear on the differential case.
NOTE: Thread two bolts into the ring gear while pressing to align the bolt holes.
10. Use Differential Side Bearing Replacer to install the differential bearings on the differential case.
11. Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to ring gear bolts and install the 10
ring gear bolts.
9.75-Inch Ring Gear
