Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
14. Remove the right side differential side gear and clutch pack.
NOTE: The differential side gears and clutch packs must be tagged LEFT and RIGHT for proper assembly.
15. Use 2-Jaw Puller for differential case bearing along with Step Plate to remove the differential case bearing.
Assembly
NOTE: Clutch pack preload adjustment is necessary for the assembly of the differential case. See: Differential Clutch/Adjustments/Clutch Pack Preload
- 9.75 Inch Axle
1. Use Differential Bearing Cone Replacer to install the new differential case bearings.
2. Position the right side differential side gear and clutch pack.