Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
11. Install the differential pinion shaft.
(1) Position the differential pinion shaft.
(2) Install the differential pinion shaft lock bolt.
12. Press the new (A) anti-lock speed sensor ring and the (B) ring gear onto the differential case.
NOTE: Thread two bolts into the ring gear while pressing to align the bolt holes.
13. Install the remaining ring gear bolts.
-
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the ring gear bolts.
