Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
NOTE: The axle housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If possible,
allow one hour before filling with lubricant to make sure silicone sealant has properly cured.
4. Fill the rear axle with Motorcraft Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A and
install the filler plug.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
