Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
14. Use (B) Companion Flange Holding Tool to hold the (A) rear axle companion flange while removing the (C) pinion nut.
15. Remove Companion Flange Holding Tool.
16. Index the (A) rear axle companion flange to the (B) pinion stem to ensure proper alignment during installation.
17. Use 2-Jaw Puller to remove the rear axle companion flange.
CAUTION: Before proceeding, place a drain pan under the axle housing.
18. Install Pinion Shaft Thread Protector and drive the pinion out of the rear of the axle housing with a soft-faced hammer.
