Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Seals and Gaskets: Service and Repair
Rear
REMOVAL
1. Remove the rear axle companion flange.
2. Pry up on the metal flange of the pinion seal and remove the pinion seal.
INSTALLATION
1. Lubricate the new pinion seal.
-
Use Premium Long-Life Grease XG-1-C or XG-1-K or equivalent meeting Ford specification ESA-M1C75-B.
2. Use (A) Pinion Seal Replacer to install the (B) pinion seal.
CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and replace.
3. Install the rear axle companion flange.