Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
Axle Pivot Bushing: Service and Repair
REMOVAL
1. Remove the front drive axle assembly.
2. Position the tube bushing removal tools.
(1) Position the Bushing Remover/Replacer Cup.
(2) Position the Drawbolt.
(3) Thread the Bushing Remover Adapter on Drawbolt.
3. Tighten the Drawbolt to remove the tube bushing.
INSTALLATION
1. Position the tube bushing and the tube bushing installation tools.
(1) Position the tube bushing.
(2) Position the Gauge Ring.
(3) Position the Bushing Replacer Collet.
(4) Position the Bushing Remover/Replacer Cup.
(5) Position the Drawbolt.
(6) Thread the Bushing Replacer Adapter on the Drawbolt.