Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
12. Fill the inboard CV joint housing with 235 grams of grease.
-
Use High Temp Constant Velocity Joint Grease E43Z-19590-A provided in the boot kit meeting Ford specification ESP-MlC207-A.
13. Position the (B) inboard CV joint housing and install the (A) retaining ring.
14. Remove any excess grease from the mating surface and position the inboard front wheel driveshaft joint boot.
15. Adjust the CV joint to boot spacing to specification.
16. Insert a dulled screwdriver blade to relieve built up air pressure in the front wheel driveshaft joint boot.