Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
6. Remove the differential pinion shaft.
(1) Remove the lock bolt.
(2) Remove the differential pinion shaft.
CAUTION: Once the differential pinion shaft has been removed, turning the differential case or an axle shaft will cause the differential pinion
gears to fall out of the assembly. This could result in chipped or damaged components.
7. Remove the U-washers.
(1) Push the axle shafts inboard.
(2) Remove the U-washers.
CAUTION: Do not damage the rubber O-rings in the axle shaft grooves.
8. Reinstall the differential pinion shaft.
(1) Install the shaft.
(2) Install the lock bolt finger tight.