Expedition 4WD V8-4.6L SOHC VIN W (1999)
Alarm Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pushing out the ignition switch lock cylinder.
3. Unscrew and remove the tilt wheel handle and shank.
4. Remove the instrument panel steering column cover.
5. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the lower steering column shroud.
3
Remove the upper steering column shroud.
NOTE: The steering wheel has been removed for clarity.
