Expedition 4WD V8-4.6L SOHC VIN W (1999)
4. Install the rear door handle trim cover.
5. Connect the electrical connector.
6. NOTE: If a new trim panel is required: Some new trim panels have a cut out opening for the window switchplate that is larger than that on the
original trim panel. When installing a new trim panel, install the window switchplate in the following sequence to make sure that the switchplate is
secured fully into the door trim panel.
7. Install the window regulator switchplate.
- Insert the rear switchplate clip into the trim panel opening.
- Install the forward and side clips into the trim panel opening.
