Expedition 4WD V8-4.6L SOHC VIN W (1999)
4. CAUTION: Replace the lining if worn to or past the specified thickness above the metal backing plate or rivets. Replace the pads in
complete axle sets.
Inspect the pads for wear or contamination.
5. CAUTION: When removing the front disc brake caliper, never allow it to hang from a brake hose. Provide a suitable support.
Remove the disc brake caliper.
1. Remove the caliper bolts using a T45 Torx(R).
2. Lift the disc brake caliper off the front disc brake caliper anchor plate.
6. On 4x2 vehicles, measure the brake disc thickness.
-
Replace the brake disc and hub if not within specification.
7. On 4x4 vehicles, measure the brake disc thickness.
-
Replace the brake disc if not within specification.
