Expedition 4WD V8-4.6L SOHC VIN W (1999)
6. Place a box end wrench on the RH front disc brake caliper bleeder screw. Attach a rubber drain tube to the RH front disc brake caliper bleeder
screw and submerge the free end of the tube in a container partially filled with c lean brake fluid.
7. Have an assistant pump the brake pedal and then hold firm pressure on the brake pedal.
8. Loosen the RH front disc brake caliper bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake
pedal while tightening the RH front disc brake caliper bleeder screw.
-
Repeat until clear, bubble-free fluid comes out.
-
Refill the brake master cylinder reservoir as necessary.
9. Tighten the RH front disc brake caliper bleeder screw.
10. Repeat Steps 6, 7, 8, and 9 for the LH front disc brake caliper bleeder screw.
11. If necessary, bleed the brake master cylinder.
