Expedition 4WD V8-4.6L SOHC VIN W (1999)
1. NOTE: Whenever installing a new brake master cylinder reservoir, install new grommets.
Install the brake master cylinder reservoir.
1. Lubricate the two grommets with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting Ford
specification ESA-M6C25-A, and insert the grommets in the brake master cylinder.
2. Press the brake master cylinder reservoir into the grommets until it snaps.
3. Connect the brake master cylinder fluid level warning switch electrical connector.
4. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A.
2. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.
