Expedition 4WD V8-4.6L SOHC VIN W (1999)
Seals and Gaskets: Service and Repair
9.75 Inch Ring Gear
Special Tools
Removal
1. Remove the pinion flange.
2. Force up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.
Installation
1. Lubricate the new rear axle drive pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the seal and install a new seal.
Using the special tool, install the rear axle drive
3. Install the pinion flange.