Expedition 4WD V8-4.6L SOHC VIN W (1999)
Apply silicone to the woodruff key slot on the crankshaft pulley.
^
Use Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
2. Use the Crankshaft Damper Replacer to install the crankshaft pulley.
3. Install the bolt and washer. Tighten the bolt in four stages.
^
Stage 1: Tighten to 90 Nm (66.15 ft. lbs.).
^
Stage 2: Loosen the bolt.
^
Stage 3: Tighten to 47 - 53 Nm (34 - 39 ft. lbs.).
^
Stage 4: Tighten an additional 85 - 90 degrees.
4. Install the drive belt.
5. Install the engine cooling fan and the fan shroud.