Expedition 4WD V8-4.6L SOHC VIN W (1999)
Timing Cover: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove both valve covers.
3. Remove the radiator.
4. Remove the water pump.
5. Disconnect the following electrical connections:
^
LH ignition coil connector (A).
^
Camshaft Position (CMP) sensor electrical connector (B).
^
Radio capacitor electrical connector (C).
6. Disconnect the following electrical connections:
^
RH ignition coil electrical connector (A)
^
radio capacitor electrical connector (B)
7. Remove the ignition coils and the ignition coil mounting brackets.
1
Remove the bolts.
2
Remove the RH ignition coil and the ignition coil mounting bracket.
3
Remove the bolt.
4
Remove the nuts.
5
Remove the LH ignition coil and ignition coil mounting bracket.
8. Raise and support the vehicle.
