Expedition 4WD V8-4.6L SOHC VIN W (1999)
17. Remove the engine front cover from the front cover to cylinder block dowel.
Installation
1. NOTE: If the engine front cover is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface
Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four
minutes, which ever is longer. Failure to follow this procedure can cause future oil leakage.
Apply silicone along the cylinder head to block surface and the oil pan to cylinder block surface.
^
Use Silicone Gasket and sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
2. Install the engine front cover on the front cover to cylinder block dowel and loosely install the bolts.
