Expedition 4WD V8-4.6L SOHC VIN W (1999)
4. Separate the air conditioning and heater housing assembly.
1
Remove the 12 bolts.
2
Separate the air conditioning and heater housing assembly.
5. Remove the temperature blend door.
INSTALLATION
1. To install, reverse the removal procedure.
Temperature Blend Door Actuator
Removal
All vehicles
1. WARNING: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or
replacing any front or side air bag supplemental restraint (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
Vehicles equipped with floor console
2. Remove the floor console.
All vehicles
