Expedition 4WD V8-4.6L SOHC VIN W (1999)
1
Connect the inlet lines.
2
Loosely install the nut.
5. Install the inlet line.
1
Remove the RH rear wheel and tire.
2
Install the end with the yellow tape between the frame and the body.
6. Connect the inlet line to the inlet line.
^
Connect the fitting and loosely install the nut.
7. Install the inlet line.
^
Install the end without tape through the floor.
8. Connect the inlet line to the inlet line.
1
Connect the me.
2
Loosely install the nut.
